参考文献

[1] ISO 5657:1997，Reaction to fire tests—Ignitability of building products using a radiant heat source

[2] ISO 5725:1986，Precision of test methods—Determination of repeatability and reproducibili­ty for a standard test method by inter-laboratory tests（now withdrawn）

[3] ISO 5725-1， Accuracy （trueness and precision） of measurement methods and results—Part 1:General principles and definitions

[4] ISO 5725-2， Accuracy （trueness and precision） of measurement methods and results—Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method

[5] ISO/TR 3814:1989，Tests for measuring ‘reaction-to-fire’ of building materials—Their development and application

[6] ISO/TS 14934-1，Reaction-to-fire tests—Calibration and use of radiometers and heat flux meters—Part 1:General principles

[7] ASTM E 1354-99，Standard Test Method for Heat and Visible Smoke Release Rates for Ma­terials and Products Using an Oxygen Consumption Calorimeter

[8] BABRAUSKAS V. Development of the cone calorimeter—A bench-scale heat release rate apparatus based on oxygen consumption[J]. Fire and Materials，1984，8:81-95

[9] TWILLEY W H and BABRAUSKAS V. User’s guide for the Cone calorimeter. NBS Spe­cial Publication SP 745. National Bureau of Standards，U. S. ，1988

[10] JANSSENS M L. Measuring rate of heat release by oxygen consumption[J]. Fire Technol­ogy，1991，27:234-249

[11] BABRAUSKAS V and GRAYSON S J eds. Heat release in fires. Barking:Elsevier Applied Science Publishers， 1992