参考文献


[1] ISO 7000 Graphical symbols for use on equipment-Registered symbols

[2] IEC 60068-1 Environmental testing-Part 1: General and guidance

[3] IEC 60204-1 Safe:y of machinery-Electrical equipment of machines-Part 1:General requirements

[4] IEC 60529 Degrees of protection provided by enclosures (IP code)

[5] IEC 61310-1 Safety of machinery-Indication,marking and actuation-Part 1:Requirements for visual, acoustic and tactile signals

[6] IEC 61310-2 Safety of machinery-Indication,marking and actuation-Part 2:Requirements for marking

[7] IEC 61310-3 Safety of machinery-Indication,marking and actuation-Part 3:Requirements for the location and operation of actuators

[8] ASTM B117 Standard practice for operating salt spray(fog) apparatus

[9] EN 349 Safety of machinery-Minimum gaps to avoid crushing of parts of the human body

[10] EN 547-2 Safety of machinery-Human body measurements-Part 2:Principles for determining the dimensions required for access openings

[11] EN 547-3 Safety of machinery-Human body measurements-Part 3: Anthropometric data

[12] EN 659 Protective gloves for firefighters

[13] EN 894-1 Safety of machinery-Ergonomics requirements for the design of displays and control actuators-Part 1:General principles for human interactions with displays and control actuators

[14] EN 894-2 Safety of machinery-Ergonomics requirements for the design of displays and control actuators-Part 2:Displays

[15] EN 894-3 Safety of machinery-Ergonomics requirements for the design of displays and control actuators-Part 3: Control actuators

[16] EN 894-4 Safety of machinery-Ergonomics requirements for the design of displays and control actuators-Part 4: Location and arrangement of displays and control actuators

[17] EN 953 Safety of machinery-Guards-General requirements fo the design and construction of fixed and movable guards

[18] EN 1846-2 Firefighting and rescue service vehicles-Part 2: Common requirements-Safety and performance

[19] EN 1846-3:2002+A1:2008 Fire-fighting and rescue service vehicles-Part 3: Permanently installed equipment-Safety and performance

[20] EN 14466:2005+A1:2008 Fire-fighting pumps-Portable pumps-Safety and performance requirements,tests

[21] NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances

[22] NFPA 11-2010 Standard for Low-,Medium-,and High-Expansion Foam

在《固定式压缩空气泡沫灭火系统 GB/T44186-2024》内检索
可同时查询多个内容,分隔符:空格为“与”,“\”为或。